Table of Contents
Advertisement
NOTE:
The screws that secure the middle frame and display panel to the display-assembly base are silver in color and
etched with "LCD" around the screw holes.
5. Remove the jig screw from the display panel.
6. Replace the screw (M3x5) that secure the display panel to the display-assembly base.
Next steps
1. Install the
system
board.
2. Install the
system-board
3. Install the
hard
drive.
4. Install the stand.
5. Install the
bottom
cover.
6. Install the
back
cover.
7. Follow the procedure in
shield.
After working inside your
computer.
Removing and installing components
59
Advertisement
Table of Contents
