Table of Contents
Advertisement
9.1.9.4 Excessively hard damping on bumps
When the bike hits a bump, the damper deflects
too slowly and the rear wheel lifts up from the
bump. Traction is reduced (blue line).
Figure 133: Excessively hard damping in the rear frame damper on bumps
Solution
Figure 134: Changing compression adjuster to a softer
setting
MY21K01 - 32_1.0_24.09.2020
All manuals and user guides at all-guides.com
Troubleshooting, fault clearance and repair
Saddle and rider are deflected upwards and
forwards, the rear wheel loses contact with the
ground and control is reduced (green line).
To increase sensitivity to small bumps, turn the
compression adjuster anti-clockwise to
decrease damping and hardness and increase
the deflection speed.
119
Advertisement
Table of Contents
