Table of Contents
Advertisement
•
Set temperature:
To modify the temperature of the water used to make the coffee,
proceed as follows:
4. Press
. The current value appears on the display (B1)
and the "New" value flashes;
5. Select the new value you want to set using the selection
arrows
(B4) or
6. When the required value (low, medium, high, maximum)
has been selected, press
The display goes back to the previous screen.
•
Water hardness:
For instructions on identifying and setting water hardness, see
section "16. Setting water hardness".
• Auto-off (standby):
Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1, 2 or 3 hours
4. Press
. The current value appears on the display (B1)
and the "New" value flashes;
5. Select the new value you want to set using the selection
arrows
(B4) or
6. When the required value (15 min, 30 min, 1 hour, 2 or 3
hours) has been selected, press
The display goes back to the previous screen.
•
Energy saving:
To disable or enable "Energy Saving", proceed as follows:
4. Press
. The display (B1) shows the current sta-
tus ("Enabled" or "Disabled"), and the operation to be
performed when confirming with
"Enable?");
5. Press
to disable or enable the function.
The display goes back to the previous screen.
Please note!
•
when the function is enabled, the "ECO" symbol appears on
the display.
•
When in energy saving mode, a few seconds elapse before
the first coffee, cappuccino or milk-based coffee is deliv-
ered as the appliance must heat up again.
•
If the milk container (D) is inserted, "Energy Saving" cannot
be activated.
•
Beep:
Use this function to enable or disable the beep. Proceed as
follows:
4. Press
. The display (B1) shows the current sta-
tus ("Enabled" or "Disabled"), and the operation to be
performed when confirming with
"Enable?");
5. Press
to disable or enable the function.
The display goes back to the previous screen.
(B5);
.
(B5) ;
.
("Disable?" or
("Disable?" or
•
Cup warmer
To warm the cups before making coffee, you can enable the cup
warmer (A11) and rest the cups on the shelf.
4. Press
. The display (B1) shows the current sta-
tus ("Enabled" or "Disabled"), and the operation to be
performed when confirming with
"Enable?");
5. Press
to disable or enable the function.
The display goes back to the previous screen.
•
Cup lighting
This function enables or disables the cup lighting. The lights
come on each time a coffee or milk-based beverage is made and
during each rinsing cycle.
To disable or enable this function, proceed as follows:
4. Press
. The display (B1) shows the current sta-
tus ("Enabled" or "Disabled"), and the operation to be
performed when confirming with
"Enable?");
5. Press
to disable or enable the function.
•
Default beverages
Use this function to reset the default values for all the beverag-
es, or the individual beverages programmed previously.
4. Press
(B3). The display (B1) shows the beverages
that have been customised and the item "All";
5. Select "All" to reset the aroma and quantity settings to the
default values, or select the required beverage, then press
(B3) or
6. "Reset?": to reset the default values, press
(B5);.
7. "Reset complete": the appliance confirms the reset and
goes back to the previous screen.
To reset another beverage, repeat from point 4 or to exit, press
(B2).
•
Default values:
Use this function to reset all the appliance and beverage settings
(apart from the language which remains as selected the first
time the appliance was used).
4. Press
(B3);
5. The display shows "Reset?": press
(B5) to reset all the settings;
6. "Reset complete": the appliance confirms the reset and
goes back to the previous screen.
To exit, press
(B2).
6.1 Bluetooth
In this menu, you can find the serial number to identify the cof-
fee machine from your mobile and enable PIN protection of the
appliance.
13
("Disable?" or
("Disable?" or
(B5);
(B3) or
(B3) or
Advertisement
Table of Contents
Troubleshooting
