Table of Contents
Advertisement
8. Other Functions
projector by SNMP.
Port Settings (
1) Select [Port Settings] on main menu in Projector Web Control.
2) Click the
3) Click the [Enable] check box to open the SNMP Port. Set the address to send
the SNMP trap to when a Failure/Warning occurs.
Security Settings (
1) Select [Security Settings] on main menu in Projector Web Control.
2) Click the [SNMP] and set the community name on the screen that is displayed.
Alert Settings (
1) Select [Alert Settings] on main menu in Projector Web Control.
3) Click the [Enable] check box to send out the SNMP trap for Failures/Warnings.
Clear the [Enable] check box when SNMP trap transmission is not required.
4) Click the [Apply]
NOTE
[Security Settings] is changed.
92
45)
56)
48)
[Port Settings] or
Advertisement
Table of Contents
