Ford Expedition 2020 Owner's Manual page 379

Table of Contents

Advertisement

E166722
WARNING: Check that the vehicle
jack is not damaged or deformed and
the thread is lubricated and clean.
WARNING: The jack supplied with
this vehicle is only intended for changing
wheels. Do not use the vehicle jack other
than when you are changing a wheel in
an emergency.
WARNING: The jack should be
used on level firm ground wherever
possible.
WARNING: Never place anything
between the vehicle jack and the ground.
WARNING: Never place anything
between the vehicle jack and your
vehicle.
WARNING: Do not work on your
vehicle when the jack is the only support
as your vehicle could slip off the jack.
Failure to follow this instruction could
result in personal injury or death.
WARNING: It is recommended that
the wheels of the vehicle be chocked,
and that no person should remain in a
vehicle that is being jacked.
WARNING: Failure to follow these
guidelines could result in an increased
risk of loss of vehicle control, injury or
death.
Expedition (TB8) Canada/United States of America, enUSA, Edition date: 201907, Third-Printing-
Wheels and Tires
Note: The jack does not require
maintenance or additional lubrication over
the service life of your vehicle.
Note: Both the front and rear jacking points
are on the frame rails. The correct locations
on the frame rails are marked with an arrow
punched into the frame rail. Jack at the
specified locations to avoid damaging your
vehicle.
1.
E325278
2. Remove the lug nuts with the lug
3. Reinstall the lug nuts until the wheel is
4. Completely lower the vehicle by turning
5. Remove the jack and fully tighten the
376
Position the jack at the jacking point
indicator arrow closest to the flat tire
location. Assemble the jack drive
extension to the lug wrench as shown
and use it to turn the jack drive
clockwise to raise the vehicle until the
flat tire is completely off the ground.
wrench. Replace the flat tire with the
spare tire, making sure the valve stem
is facing outward.
snug against the hub. Do not fully
tighten the lug nuts until the wheel has
been lowered.
the jack drive counterclockwise.
lug nuts in the order shown. See
Technical Specifications (page 378).

Advertisement

Table of Contents
loading

Table of Contents