Fiat ABARTH 124 SPIDER 2019 User Manual page 226

This unit does not support a USB
3.0 device. In addition, other devices
may not be supported depending on
the model or OS version. USB devices
formatted to FAT32 are supported
(USB devices formatted to other
formats such as NTFS are not
supported).
Bluetooth Hands Free
Warning!
Always drive safely with your hands on
the steering wheel and obey all applicable
laws. You have full responsibility and
assume all risks related to the use of the
features and applications in this vehicle.
Only use the features and applications in
this vehicle when it is safe to do so. Failure
to do so may result in an accident
involving in serious injury or death.
It can be dangerous, if the volume of the
sound system is too loud. If the volume is
too loud to hear background noises (e.g.
horns, ambulances, police vehicles, etc.)
injury may occur.
General Information
FCC Rules and with Industry Canada
license-exempt RSS standard(s).
Operation is subject to the following
two conditions:
224
1. This device may not cause harmful
interference, and
2. This device must accept any
interference received, including
interference that may cause undesired
operation.
Note:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's
authority to operate the equipment.
Device Pairing
To use Bluetooth audio and
Hands-Free, the device equipped with
Bluetooth has to be paired to the unit
using the following procedure. A
maximum of seven devices including
Bluetooth audio devices and hands-free
mobile phones can be paired.
Note:
The Bluetooth system may not operate
for one or two minutes after the ignition
is switched to ACC or ON. However,
this does not indicate a problem. If the
Bluetooth system does not connect
automatically after one or two minutes
have elapsed, make sure that the
Bluetooth setting on the device is
normal and attempt to reconnect the
Bluetooth device from the vehicle side.
Pairing Procedure
Proceed as follows:
1. Select the icon on the home
screen to display the "Settings" screen.
2. Select the Devices tab.
3. Select Bluetooth and turn the
Bluetooth setting on.
4. Select Add New Device to display
the message and switch to the device
operation. Using your device, perform a
search for the Bluetooth device
(external device).
5. Select "124 Spider" from the device
list searched by the device.
6. Device with Bluetooth version
2.0 input the displayed 4-digit pairing
code into the device. Device with
Bluetooth version 2.1 or higher make
sure the displayed six digit code on the
audio is also displayed on the device,
and touch the Yes. Connection
permission and phonebook access
permission for your mobile device may
be required depending on the mobile
device. If pairing is successful, the
functions of the device connected to
Bluetooth are displayed.