Fiat ABARTH 124 SPIDER 2019 User Manual page 169

In compliance with the above
conditions, towing with a tow eye must
take place with two vehicles (one towing,
the other towed) aligned as much as
possible along the same center line.
Damage to your vehicle may occur if these
guidelines are not followed.
When towing, only use a facility that can
tow vehicles with low ground clearances
as extensive damage can result by using a
standard tow truck platform.
Proceed as follows:
1. Remove the towing eyelet and the
lug wrench from the luggage
compartment.
2. Wrap a flathead screwdriver or
similar tool with a soft cloth to prevent
damage to a painted bumper, and open
the cap located on the front or rear
bumper.
08060203-121-001AB
Front Bumper Cap Location
1— Front Bumper Cap
08060203-122-001AB
Rear Bumper Cap Location
Note: Do not use excessive force as it
may damage the cap or scratch the
painted bumper surface. Remove the
cap completely and store it so as not to
lose it.
3. Securely install the tow eye in front
or rear using the lug wrench or
equivalent.
08060201-121-001AB
Installing Front Towing Eye
08060201-122-001AB
Installing Rear Tow Eye
4. Hook the towing rope to the tow
eye.
167