Fiat ABARTH 124 SPIDER 2019 User Manual page 225

Settings
Note:
Depending on the grade and
specification, the screen display may
differ.
Select the icon on the home screen to
display the Settings screen. Switch the
tab and select the setting item you want
to change. For example, you can
enable/disable the "Daytime Running
Lights" feature through the settings menu
by selecting the "Vehicle" option, then
selecting the "Lighting" option with in the
"Vehicle" menu, and then selecting the
preferred option of "On" or "Off" for the
"Daytime Running Lights" feature (Daytime
Running Lights cannot be turned off in
vehicles sold in the Canadian market).
You can customize settings in the setup
display as follows:
Display: Refer to the FIAT Connect
7.0 supplement for further information.
Safety: Blind Spot Monitoring Volume
or Other.
Sound: Refer to the FIAT Connect
7.0 supplement for further information.
Clock: Adjust Time, GPS Sync, Time
Format, Time Zone Select, or Daylight
Savings Time.
Vehicle: Rain sensing Wiper, Door
Lock, or Other.
Devices: Select Bluetooth or Network
Management.
System: Tool Tips, Language,
Temperature, Distance, Music Database
Update, Factory Reset, About
(agreements and disclaimers), or About
(version information).
AUX/USB/iPod Mode — If
Equipped
Audio can be heard from the vehicle's
speakers by connecting a portable
audio device to the auxiliary jack. An
Auxiliary cable is required.
In addition, audio can be played from the
vehicle audio system by connecting a
USB device or an iPod to the USB port.
06020700-122-001
USB/Auxiliary Jack Location
1 — USB Port
2 — Auxiliary Jack
How To Connect USB Port/Auxiliary
Jack
If there is a cover on the AUX jack or
USB port, remove the cover.
Connecting A USB — If Equipped:
Connect the connector on the device to
the USB port.
Connecting With An Auxiliary Cable:
Connect the device plug/connector
lead to the auxiliary jack.
How To Use AUX Mode
Select the icon to display
"Entertainment" on the home screen.
Select "Audio Source" to see a list of
sources available. Select AUX to switch
to the AUX mode.
Playable Data: MP3/WMA/AAC/OGG
file.
Note:
If a device is not connected to the
auxiliary jack, the mode will not switch
to the AUX mode.
Adjust the audio volume using the
portable audio device, commander
switch, or audio control switch. Audio
adjustments can also be made using
the portable audio device's volume
setting.
If the connection plug is pulled out
from the auxiliary jack while in AUX
mode, noise may occur.
223