Haier HLT364XXQ User Manual page 16

3. Connect the other end to their respective washer inlet located at the rear of
the washer,
Note: Hot water needs to be at a temperature of at least 120°F - 140°E (49°C
- 60°C) for the soap to dissolve and to avoid soap residue remdning on
clothes.
4. Using the drain hose clamp, attach the drain hose to the unit as shown below.
Install the drain hose hook to the outer drain hose tube.
S
5. Plug in the washer to a regular 120 volt / 60 Hz, 15 amp outlet.
15