Timer Operations - Kenwood KRX-792 Instruction Manual

Be sure to adjust the present time before proceeding to the
following. Timer operations
m@ Timer reception of radio broadcast
Switch the power ON 6 Select the preset key under which the station to
. be received has been preset.
= ©O©OOOOO w» "dn
e The station must be preset previously.
@ Remove disc(s) from the CD player.
@ Remove tape(s) from the cassette decks. 7 Activate the execution of the program.
Select the program setting mode. Sor ace]
pros. 1] Proc. 2 fe I Lae]
=
Program 1 Program 2 Programs 1 Timer programs
will be will be and2wiilbe — will not be
PROG. 1 or PROG. 2. executed. executed. executed. executed.
Input the ON time with the numeric keys. PROG. PROG. PROG.
> [ey Ee ee ho
6:30 AM: {0], (6, BI, (0
Goes off.
') © © © © © @ eg @ The selected program No. indicator lights up.
8 Adjust the volume.
VOLUME CONTROL
a Ss
Input the OFF time with the numeric keys.
7:00 AM: (0], [7], [0], [0]
©©0020000 gy FE
9 Switch the power OFF.
POWER
Select the TUNER source.
TUNER
To continue the reception of radio station which has
been started to be received by timer ON:
Press the key before the OFF time comes so that the
program number display is extinguished. This allows to receive radio
broadcasting even after the OFF time.
Notes:
1. If you commit a mistake in the timer programming, re-start a new program from the beginning.
2. If it is required to modify a program which has already been set, set a new program from the beginning.
3. When a program has previously been set in the program No. selected in step 2, the newly-set program replaces the previous program.
4. Do not operate the key or key while the time program execution has been activated; otherwise malfunction will occur.
26 KRx-792 (En)