Table of Contents
Advertisement
HDCP Mode
3
drop-down menu defines the HDCP mode of the HDMI
Loop output as follows:
•
Disable Authentication — Do not authenticate
HDCP. HDCP inputs result in a HDCP green screen.
Follow Input (default) — Attempt HDCP authentication for a maximum of 10
•
seconds. Encrypts Loop Out only as required by the detected input signal.
•
Always Encrypt Output — Attempt HDCP authentication for a max of 10
seconds. Always encrypts Loop Output.
•
Follow Input (with continuous trials) — Continuous HDCP authentication.
Encrypt Loop Out only as required by the detected input signal.
•
Always Encrypt Output (with continuous trials) — Continuous HDCP
authentication. Always encrypt Loop Output.
Video Mute
4
Sync Mute
5
USB Output Pane
1 1 1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1
2 2 2 2 2 2 2 2
2 2 2 2
2 2 2 2 2 2
3 3 3 3 3 3 3 3
3 3 3 3
3 3 3 3 3 3
4 4 4 4
4 4 4 4 4 4
4 4 4 4 4 4 4 4
Figure 28.
USB Host — View-only field that displays the USB protocol of the connected host.
1
Resolution — View-only field that displays the resolution of the video on the USB
2
Output.
Format — View-only field that displays the USB video output format.
3
Video Mute — This button selects and deselects the USB Output mute.
4
USB Groups Pane
1 1 1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1
2 2 2 2 2 2 2 2
2 2 2 2 2 2
2 2 2 2
Figure 29.
Group 1 — Click to select USB group 1, which supports USB 3.x (preferred) and
1
USB 2.0 hosts.
Group 2 — Click to select USB group 2, which is optimized for USB 2.0 Plus extension
2
over Extron USB Extender Plus, NAV, or FOX3 products.
Configure ( ) button — Click to open the Configure dialog box (see
3
page 35).
MediaPort 300 HDMI and Audio to USB Scaling Bridge • Product Configuration Software
(see
figure 38
on page 33) — This
— This button mutes the HDMI Loop output to black.
— This button mutes the sync and video signals to the HDMI Loop output.
USB Output Pane
3 3 3 3
3 3 3 3 3 3 3 3
3 3 3 3 3 3
3 3 3 3
3 3 3 3 3 3 3 3
3 3 3 3 3 3
USB Groups Pane
figure 30
on
34
Advertisement
Table of Contents
