Table of Contents
Advertisement
Updating Firmware
Update firmware via PCS as follows:
1.
Connect the MediaPort 300 to the host PC via the LAN port (see
front panel USB Config port (see
2.
On the PCS main page for MediaPort 300, select the drop down triangle on the
MediaPort 300 tab (see figure 23,
Figure 23.
3.
Select Update Firmware (
4.
Click Continue. The Update Firmware to This Device dialog box opens (see
figure 24).
1 1 1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1
Figure 24.
5.
Click Open Firmware File... (
location is Program Files (x86) > Extron > Firmware > MediaPort_300).
6.
Select Open.
7.
Select Update (
MediaPort 300 HDMI and Audio to USB Scaling Bridge • Product Configuration Software
on page 20).
A
below).
1
1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1
2 2 2 2
2 2 2 2 2 2 2 2
2 2 2 2 2 2
3 3 3 3 3 3
3 3 3 3 3 3 3 3
3 3 3 3
Accessing Update Firmware
2
) > Update Firmware to this Device (
2 2 2 2
2 2 2 2 2 2
2 2 2 2 2 2 2 2
Update Firmware to This Device Dialog Box
1
) and browse the disk for the firmware file (the default
2
) to update the firmware.
on page 15) or the
G
3
).
31
Advertisement
Table of Contents
