Malfunction Table - Bosch HMT84G654V Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

Area
Cleaning agents
Recess in cooking
Damp cloth:
compartment
Ensure that no water seeps through the
turntable drive into the appliance inte-
rior.
Turntable and turnta-
Hot soapy water:
ble ring
When putting the turntable back in
place, make sure it slots in correctly.
Wire rack
Hot soapy water:
Clean using stainless steel cleaning
agent or in the dishwasher.
Door panels
Glass cleaner:
Clean with a dish cloth. Do not use a
glass scraper.
Seal
Hot soapy water:
Clean with a dish cloth, do not scour. Do
not use a metal or glass scraper for
cleaning.

Malfunction table

Malfunctions often have simple explanations. Please refer to the
malfunction table before calling the after-sales service.
If a meal does not turn out exactly as you wanted, refer to the
Tested for you in our cooking studio section, where you will
find plenty of cooking tips and tricks.
Troubleshooting
Error message
The appliance does not work
Three zeros light up in the display.
The appliance is not in operation. A
cooking time appears in the display.
The microwave does not work.
It takes longer than before for the
food to heat up
The turntable makes a scratching or
grinding noise.
Microwave operation has been can-
celled for no apparent reason.
"M" appears in the display.
Possible cause
The plug is not plugged in.
Power failure
Faulty circuit breaker
Faulty operation
Power failure
The rotary selector was actuated acciden-
tally.
The Start button was not pressed after set-
ting.
The door was not fully closed.
The Start button was not pressed.
The microwave power level setting was too
low.
A larger amount of food than usual has
been placed in the appliance.
The food was colder than usual.
Dirt or debris in the area around the turnta-
ble drive.
The microwave has a fault.
The appliance is in demo mode.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out by one of our trained after-sales engineers.
You can take remedial action yourself for some error
messages.
Remedy/note
Plug the plug in
Check whether the kitchen light works.
Look in the fuse box to make sure that the cir-
cuit breaker for the appliance is in working
order.
Switch off the circuit breaker in the fuse box.
Switch it back on after approx. 10 seconds.
Reset the time.
Press the Stop button.
Press the Start button or cancel the setting with
the Stop button.
Check whether food residue or debris is
trapped in the door.
Press the Start button.
Select a higher microwave power setting.
Double the amount – double the time.
Stir or turn the food during cooking.
Clean the roller ring and the recess in the cook-
ing compartment.
If this fault occurs repeatedly, please call the
after-sales service.
Press and hold the Start button and the Stop
button for approx. 7 seconds.
Demo mode is deactivated.
11

Advertisement

Chapters

Table of Contents
loading

Table of Contents