Browser; Server Setting - Panasonic GSM900 Manual

Browser

Browser
The phone's WAP
(Wireless Application
Protocol) Browser
enables you to access
Internet services
supported by the
network, such as
news, weather reports,
sport etc.

Server Setting

Before Internet services can be accessed, you need to subscribe to your network operator or Internet
Service Provider (ISP) to enable the relevant configuration information. Please contact your network
service provider to ensure that your network settings are correct.
NOTE: Modifying previously entered settings can cause failure of the Browser.
From Browser menu
A
1
4 < / A
2 Settings
4 < / A
3 WAP profiles
Five server settings can be set up in the phone. If you find your server's
name under WAP profiles, select the server and press
< A
select Edit and press or
Network Service Provider for these settings. [Profile name, Homepage,
Gateway, Port, Data connections (GPRS and CSD setting)]
NOTE: You need to set GPRS and CSD Setting in Settings>Data connections menu before setting the
server information.
Those configuration Options will be given by Network service provider.
Once completing the entry, press
pressed.
The first time that the browser is activated there will be no content stored so the Home URL content
will be displayed (as defined by the network operator). The Home URL will be recalled from the
cache, each time the browser is activated. (Cache is the phone's memory that stores content
downloaded in the past.)
A
(Options) then
. If no settings are present contact your
A <
(Save) then press or select Activate after
A
(Options) is
83