Tools, Supplies, And Required Equipment - Traxxas RUSTLER 4x4 ULTIMATE Owner's Manual

TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT

Your model comes with a set of specialty metric tools. You'll need to purchase other items, available from your hobby dealer, to operate and
maintain your model.
Supplied Tools and Equipment
2.5mm "L" wrench 2.0mm "L" wrench
Optional pinion gear Preload spacers and shock pistons
Required Equipment
(not included)
6 or 7-cell NiMH battery pack,
or 2s or 3s LiPo battery pack,
with Traxxas ID® High-Current Connector
REMOVING AND INSTALLING THE BODY
Your Rustler 4X4 Ultimate includes an innovative latching system for
securing the body to the chassis. To remove the body for chassis access:
1. Turn the handle 90 degrees counterclockwise to unlock the body
latch.
2. Open the latch to release the truck body from the rear shock tower.
3. Slide the body backward away from the front shock tower to release
the front body tab. Note: The body latch must clear the rear shock
tower.
4. Gently lift the body straight up from the chassis. Lift the front
and rear of the body evenly or it may become difficult to remove.
(Installation of the body is the reverse of removal.)
5. Practice this a few times until you become familiar with the latching
mechanism. The more you do it, the faster you will be.
1.5mm "L" wrench
Foam battery spacer block
EZ-Peak ™ Plus
(part #2970)
Battery charger with iD® 4 AA alkaline batteries
4-way wrench 8mm/4mm wrench
*Battery and charger style are subject to change and may vary from images.
For more information on
batteries, see Use the Right
Batteries on page 13.
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Traxxas Ultra Premium Tire
Glue, Part #6468 (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Phillips screwdriver
• Soldering iron
RUSTLER 4X4 ULTIMATE • 7