Traxxas RUSTLER 4x4 Owner's Manual
Hide thumbs Also See for RUSTLER 4x4:

Advertisement

Quick Links

MODEL 67064-4
1
owner
s manual
'

Advertisement

Table of Contents
loading

Summary of Contents for Traxxas RUSTLER 4x4

  • Page 1 MODEL 67064-4 owner s manual ’...
  • Page 2 ® 12T 550 motor contact us and what your support options are. and a smooth XL-5 electronic speed control, Rustler 4X4 is built for TOOLS, SUPPLIES, AND high-speed action. The new wheels and tires feature the latest tread REQUIRED EQUIPMENT Quick Start patterns and rubber compounds for superb driving.
  • Page 3: Before You Proceed

    Traxxas service needs. Maintenance and replacement identified by the icons below. Be sure to read them! Win, Rustler 4X4, Rustler 4X4 VXL, parts may be purchased directly from Traxxas by phone or online and ProGraphix are trademarks An important warning about personal safety or avoiding at Traxxas.com.
  • Page 4: Safety Precautions

    SAFETY PRECAUTIONS • Use Neutrally Timed Motors: For reverse use, the motors must have All of us at Traxxas want you to safely enjoy your new model. Operate your model sensibly and with care, and it will be exciting, safe, and 0°...
  • Page 5 LiPos. on the risks associated with LiPo battery use. Traxxas does not • Store and transport your battery pack(s) in a cool dry place.
  • Page 6 If eye or skin contact occurs, flush with water. • If a battery gets hot to the touch during the charging process (temperature greater than 110°F / 43°C), immediately disconnect the battery from the charger and discontinue charging. 6 • RUSTLER 4X4...
  • Page 7: Tools, Supplies, And Required Equipment

    *Battery and charger style are subject to change and may vary from images. REMOVING AND INSTALLING THE BODY Your Rustler 4X4* includes an innovative latching system for securing the body to the chassis. To remove the body for chassis access: 1.
  • Page 8 ANATOMY OF THE RUSTLER 4X4 Shock Battery Hold-Down Steering Block Caster Block Traxxas High-Current Connector Rear Camber Link Drive Shaft Front Camber Link Rear Shock Tower Battery Compartment Receiver Box Front Bumper Spur Gear Front Shock Tower Rear Bumper Front Suspension Arm...
  • Page 9: Quick Start: Getting Up To Speed

    Make a habit of turning the transmitter on first and off last. Follow these critical steps to maintain the performance of your model and keep it in excellent running condition. Look for the Quick Start logo at the bottom of Quick Start pages. RUSTLER 4X4 • 9...
  • Page 10 TRAXXAS TQ 2.4GHz RADIO SYSTEM INTRODUCTION LiPo - Abbreviation for Lithium Polymer. Rechargeable LiPo battery packs are known for their special chemistry, which Your model includes the TQ 2.4GHz transmitter. When powered Applying the Decals allows extremely high energy density and current handling in a on, the TQ 2.4GHz will automatically locate and lock onto an...
  • Page 11 TRAXXAS TQ 2.4GHz RADIO SYSTEM IMPORTANT RADIO SYSTEM PRECAUTIONS Thermal Shutdown Protection - Temperature sensing electronics are used in the ESC to detect overloading and overheating of the • Do not kink the receiver antenna wire. Kinks in the antenna wire To prevent loss of radio range, transistor circuitry.
  • Page 12 TRAXXAS TQ 2.4GHz RADIO SYSTEM MODEL WIRING DIAGRAM Your model is equipped with the Traxxas TQ 2.4GHz transmitter. XL-5 Wiring Diagram The transmitter has two channels: Channel one operates the Motor steering, and channel two operates the throttle. The receiver...
  • Page 13 Traxxas High-Current Connector is required. green, check the polarity of the Traxxas Power Cell iD batteries are strongly recommended for maximum batteries. Check rechargeable batteries for a full charge. If you performance and safer charging.
  • Page 14 Secure, long-lasting, and easy to separately) to automatically recognize connected battery grip, the Traxxas connector is engineered to extract all the power your packs and optimize the battery has to give. charge settings for the battery.
  • Page 15 TRAXXAS TQ 2.4GHz RADIO SYSTEM RADIO SYSTEM CONTROLS • In order for the transmitter and receiver to bind to one another, the receiver in the model must be turned on within 20 seconds Remember, always turn the of turning on the transmitter. The transmitter LED will flash fast transmitter on first and off red, indicating a failure to link.
  • Page 16 TRAXXAS TQ 2.4GHz RADIO SYSTEM Throttle reversing procedure: 6. When looking down at the Note: Throttle reversing is often times unnecessary on electric model, the front wheels Using Reverse: While driving, models, as issues with the throttle can usually be solved by...
  • Page 17 TRAXXAS TQ 2.4GHz RADIO SYSTEM Higher Speeds Require Greater Distance TQ 2.4GHz Binding Instructions The faster you drive your model, the more quickly it will near the For proper operation, the transmitter and receiver must be Failsafe limit of radio range. At top speeds, models can cover anywhere electronically ‘bound.’...
  • Page 18: Adjusting The Electronic Speed Control

    LED will turn off). After ten seconds, the Thermal Protection motor will beep twice and the LED will Thermal Shutdown shine GREEN. Release the button. Single Button Setup 3. Low-Voltage Detection is now ACTIVATED. Low-Voltage Detection Yes (User Enabled) 18 • RUSTLER 4X4...
  • Page 19 3. When the LED blinks RED TWICE, release the EZ-Set button. Release Solid 4. The LED will blink and then turn solid green (Low-Voltage Detection ACTIVE) or red (Low-Voltage Detection DISABLED). The model is ready to drive. RUSTLER 4X4 • 19...
  • Page 20 • Fast Blinking Green: The XL-5’s LED will blink fast green if the speed control is not receiving a signal. Make certain the speed control is properly plugged into the receiver and the transmitter is switched on. 20 • RUSTLER 4X4...
  • Page 21: Driving Your Model

    • The Traxxas TQ 2.4GHz transmitter is not water resistant. Do not subject it to impossible to give exact run times for the model.
  • Page 22 You do not need to lubricate the gears. • Titan motor: Remove the motor, clean with aerosol motor cleaner, and re-oil the bushings with lightweight motor oil. Be sure to wear eye protection when using spray aerosol cleaners. 22 • RUSTLER 4X4...
  • Page 23 8. Apply a small bead of silicone grease to the foam on the wire clamp (C). 9. Install the wire clamp and tighten the two 2.5x8mm cap screws securely (D). RUSTLER 4X4 • 23...
  • Page 24: Adjusting Your Model

    Experiment with different springs and settings. The more progressive suspension settings help reduce shock oils to find what works best for your current track conditions. body roll (increased roll stiffness), dive during braking, and squat during acceleration. 24 • RUSTLER 4X4...
  • Page 25 When going brushless, differential gears, parts #5379R and #6879R, to cool the motor properly. For this type of driving, smaller pinion can be used for maximum durability. gears are recommended to reduce load on the motor. RUSTLER 4X4 • 25...
  • Page 26 The diameter of the wheels is an innovative Rustler 4X4 will generally benefit from higher viscosity oil when design, and there is a variety of different tires available for you to climbing or racing on low traction surfaces.
  • Page 27 4. Rejoin the differential case halves, using care to align the screw holes. Be sure the rubber gasket is in place or the differential may leak. 5. Install the 2.5x10mm screws and tighten securely. RUSTLER 4X4 • 27...
  • Page 28: Maintaining Your Model

    If the bottom of the shock is leaking, then it condition of the batteries. is time for a rebuild. The Traxxas rebuild kit for two shocks is 8. Check for any loose screws in the chassis structure part #2362.
  • Page 29 Rear Suspension 3. Pull the rear suspension assembly away from the chassis. Assembly 4. The slipper clutch assembly can now be removed. 4x12 BCS 4x10 BCS Slipper Clutch Assembly 4x14 BCS 3x15 BCS Front Suspension Assembly RUSTLER 4X4 • 29...
  • Page 30 ’ 6250 TRAXXAS WAY, MCKINNEY, TEXAS 75070 1-888-TRAXXAS 181031 67064-4-OM-N-EN-R01...

This manual is also suitable for:

67064-4

Table of Contents