Location And Function Of Parts And - Sony DXC-325P Service Manual

(PEPEEEE ERED
Pe ULAR we ew pnd
1-2. LOCATION AND FUNCTION OF PARTS AND CONTROLS
{3] VTR START/RETURN VIDEO button
EAR jack
Battery pack compartment
[5]INTERCOM jack
GEN LOCK input
connector
DIN 50-pin connector
us (To be connected directly to the 50-pin
[2 /DC IN connector A. connector of the color video camera)
[1] GEN LOCK input connector (BNC connector) {3] VTR START/RETURN VIDEO button
Connect the gen-iock input signal (VBS or BS) fér When the camera is connected to a portable VTR, press
synchronization here. No connection is necessary when this button to start recording. To stop recording, press the
only one camera is used. button again.
If the camera is connected to a CCU-M3/M3P camera
{2] DC IN (input) connector (XLR 4-pin) control unit, the return video picture can be monitored on
This connector is equipped for supplying power from an the viewfinder screen while the button is kept depressed.
external DC power supply (12 V DC). When the button is released, the camera picture can be
monitored.
[4] EAR (earphone) jack (mini jack)
Connect an earphone to monitor the playback or
recording sound from the VTR.
Pin assignment
1: GND
2:NC
3: NC
A-+12V DC [5] INTERCOM jack (mini intercom jack)
Connect a DR-100 intercom headset (optional) here. It will
be possible to communicate between the camera and the
operator of the connected camera control unit or video
switcher.
When the power is supplied to this connector, the power is
automatically cut off from both the NP-1A inside the battery
pack compartment and the VTR/ICCU/CMA connector.
CA-325 (UC)
1-2 CA-325P (EK)