Table of Contents
Advertisement
Make sure that your smart device is
connected to the wireless network.
1. Go to the App Store on your smart
device or scan QR code (
code on rating plate' paragraph ).
2. Download and install the My AEG
Care App.
3. Make sure you started a Wi-fi
connection in the appliance. If not,
read the next paragraph 'Configuring
the appliance wireless connection'.
4. Start the application. Select the
country and language and login with
Your email and password. If you do
not have an account, create a new
one following the instructions in My
AEG Care.
5. Follow the instructions on the App for
the appliance registration and
configuration.
12.3 Configuring the
appliance wireless
connection
1. Press the On/Off button for a few
seconds to activate the appliance.
Wait about 10 seconds before
proceeding with wireless
configuration.
2. Select a programme by turning the
programme dial.
3. Press and hold the Remote Start
button for a few seconds until a 'click'
sounds. Release the button.
appears on the display for 5 seconds
and the indicator
The wireless module begins starting up.
Make sure that you APP is
ready for connection.
4. After about 10 seconds,
(Access Point) appears on the
display.
see 'QR
starts blinking.
The access point will be open for about 3
minutes.
5. Configure the My AEG Care app on
your smart device and follow the
instructions to connect the appliance
to your Wi-Fi network.
6. If the connectivity is configured, when
the programme information screen
returns, the indicator
display.
Every time you switch the
appliance on, the appliance
takes about 10 seconds to
connect to the network
automatically. When the
indicator
the connection is ready.
To switch the wireless connection off,
press and hold the Remote Start
button for a few seconds until the first
acoustic signal. Release the button.
appears on the display for 5
seconds.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
press and hold the Remote Start
button for a few seconds until the second
acoustic signal:
display for a few seconds.
ENGLISH
35
is on the
stops blinking
appears on the
Advertisement
Table of Contents
