Table of Contents
Advertisement
When the programme stops the display
shows a zero
, the indicator
steady on and the indicator
blinking, and the Start / Pause
remains lit. The drum performs smooth
movements for about 30 minutes to keep
the steam benefit. By touching any
button the anti-crease movements stop
and the door unlocks, the appliance
proposes again the previous set
programme.
To interrupt the anti-crease phase, you
can also:
• Press the On/Off button for a few
seconds to activate or the deactivate
the appliance.
• Turning the programme dial in
another position.
An half laundry load helps to
reach better results.
7.10 Extra Rinse
With this option you can add a few rinses
to the selected washing programmes and
optimise the fabric softener distribution
and improve the fabric softness.
It is suggested when you use the fabric
softener.
Useful for people allergic to detergents
and in areas where the water is soft.
This option increases the programme
duration.
The button indicator comes on.
7.11 Time Save
With this option you can decrease the
programme duration.
• If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing programme. Touch this
button once to decrease the duration.
• In case of smaller load, touch this
button twice to set an extra quick
programme.
In this case, the temperature 95°C is
not selectable.
The led of the button is on and the
display shows the set programme
duration.
is
starts
led
7.12 Stains/Prewash
Press this button repeatedly to activate
one of the two options or both.
The relevant indicator comes on in the
display.
•
By setting this option, the indicator
appears close to detergent symbol
automatically dose an extra amount of
detergent when automatic detergent
tank is enabled.
If automatic detergent tank is Off, it is
possible to run this option as in
traditional washing machine by filling
detergent or additive in the manual
compartment.
•
Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust, mud and other
solid particles.
This option can also be used
to shorten the steam
programme duration.
Stains
, and the appliance will
If you press detergent
tank button while Stains
option is active,
AutoDose function is
switched off, but Stains
option still remains active
in manual mode.
Prewash
When selecting a pre-
wash phase and
AutoDose is active, the
appliance will
automatically dose the
detergent. When
AutoDose is switched off,
put the detergent/additive
in a dosing ball inside the
drum.
The options can increase the
programme duration.
ENGLISH
19
Advertisement
Table of Contents
