Table of Contents
Advertisement
ON/OFF Switch. International symbol 1 means On,
International symbol O means Off.
Cleaner
Height
Setting.
An
;
adjustment that raises or lowers
the cleaner base to match the
type of floor surface. With the
cleaner cord unplugged, set the
adjustment to lowest setting for
maximum carpet cleaning. If the
cleaner
is difficult to push,
move
adjustment
to
next
highest setting until cleaner is comfortable to push. The brush roll must reach the carpet,
for effective cleaning. For ease in moving the adjustment knob, place handle in operating
|
position and tilt cleaner back to remove weight from front wheels.
:
WARNING: Avoid injury. Keep loose clothing, hair,
fingers, and all other parts of body |
away from any moving part (such as
the revolving brush). Turn off the
switch and unplug the cleaner before
changing the cleaner height setting.
Handle Release. Step on
Ya Store
handle release to pull
['
handle
back
to
a
comfortable operating
position.
To lower
handle completely to
the
floor,
depress,
handle
release
a @=5u
Clean
second time.
Under
Helpful Information:
Before cleaning under low
furniture, check area first for
objects that might harm the
unit or block the vacuum
hose.
Dusting/
Upholstery
Brush
NOTE: While using accessories, do not place
Crevice
cleaner on furniture or steps as the brush
Wand
roll may cause damage. Place cleaner on
floor with the handle in storage position.
i
Hose
1. To use accessories remove hose from rear of
or
cleaner by lifting up and twisting.
Wand
2. Place desired accessory onto end of hose or wand.
Dusting/Upholstery Brush is for furniture, blinds, books,
lamp shades, shelves, curtains, draperies, cushions and fabrics.
Crevice Wand cleans corners, stairs, baseboards, and
between cushions.
Nested extension wands to add reach.
<—_—_
—»
ci eee
® Grasp both wands near ridges.
© Pull apart.
> Sea
* Turn ridge end to center.
¢ Push wands together.
Advertisement
Table of Contents
