Advertisement
Available languages
Available languages
| Meyer: \i(ela mci aiemmelaleiicelameyi
Parts and Controls
The numerals such as @ in the illustrations indicate the page number on
which this part is discussed.
Front and side
[1] BACK FOCUS
adjusting screw
[2] LENS connector ®
Lens mount
[3] Mounting screw holes
(C mount) ®
[1] BACK FOCUS adjusting screw
The camera is shipped with the back focus adjusted to suit almost all lenses. if
necessary, turn this screw with a screwdriver to adjust the focal plane. It has a
self-locking mechanism, so once adjusted the focus will not drift.
[2] LENS connector (4-pin)
When using an auto-iris or zoom lens, replace the plug on the lens cable with
the plug supplied with the camera, and piug into this connector.
[3] Mounting screw holes
Use these holes to fix the camera to a mounting bracket or tripod. The mounting
screw must be as follows.
1/4" UNC (20 pitch)
£: 4.5mm +0.2 mm (ISO standard), or
=
t e
0.197" (ASA standard)
Advertisement
