Legacy Usb Support - Toshiba Satellite A80-127 User Manual

2nd HDD ->
Built-in HDD
If a boot command is not found on the first detected hard disk drive, the
system will not boot from the other hard disk drive. It will search the next
device in the boot priority for a boot command.
Some modules may not be displayed.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode, you can
turn on the computer by pressing any key. It is effective only for the internal
keyboard and only when the computer is in standby mode.
Enabled
Disabled
Do not install or remove an optional memory module while Wake-up on LAN
is enabled.
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
USB

Legacy USB Support

Use this option to enable or disable Legacy USB support. If your operating
system does not support USB, you can still use a USB mouse, keyboard,
and FDD by setting the Legacy USB Support to enable.
LAN
Wake-up on LAN
This feature lets the computer's power be turned on when it receives a wake-
up signal from the LAN.
Enabled
Disabled
Toshiba A80
The computer will look for the 2nd hard disk drive
first, next the Built-in hard disk drive, and then the
hard disk drive.
Enables the Wake-up on Keyboard.
Disables the Wake-up on Keyboard (Default).
Enables Wake-up on LAN.
Disables Wake-up on LAN (Default).
HW Setup
7-4