Table of Contents
Advertisement
I TALKBACK VOLUME
|
10%
■ Optical Pert 2
The ADAT 2 / S/PDIF port on the rear panel of the MasterControl I OPTICAL PORT 2
|
ADAT
When a footswitch is attached to the FOOTSWITCH connection
on the rear panel of the MasterControl, it can be set to operate on
the control surface or act as the TALKBACK button.
I FOOTSWITCH SETUP I
| Control Surface |
■ Footswitch Polarity
This setting changes the polarity of a connected footswitch. The
default is "Positive On," meaning the pedal, when pressed, will
activate or engage whatever it is set to. Selecting "Negative On"
will configure it such that it will be on as long as the pedal is not
I FOOTSWITCH POLAR
|
Positive On
I SEND SYSEX F'RE 1 I
|
Press to send
|
37
Advertisement
Table of Contents
