Sony Trinitron KV-20TS27 Operating Instructions Manual page 16

Using the TIMER/BLOCK Functions
/NVEsTI Es] o) (om al Oaleaelelatss
Once the internal clock is set, the current time will be displayed on the screen.
You must set the clock correctly to activate the program start TIMER and channel BLOCK.
Program start TIMER | Makes a program of your choice appear on the screen automatically at the desired time.
Blocks a channel from appearing on the screen for 12 hours.
Channel BLOCK Use channel BLOCK to prevent children from watching undesirable programs.
The buttons used for the above functions
are located on the Remote Commander. To set the internal clock, program start TIMER and channel BLOCK, you
need to go into the corresponding "pages": "clock page," "TIMER page"
and "BLOCK page."
internal clock
To change the "pages," press TIMER/BLOCK.
"AM*/PM" indication disappears.
"clock page"
buttons
indication
disappears TIMERBLOCK
—
aproue me page
RM-783 "normal page" "BLOCK" page"
= (no display) (red display)
CAUTION
¢ All settings will be erased from the TV's memory if the TV is unplugged, or if a power
failure occurs.
¢ The TIMER and BLOCK functions will operate only if the clock is set correctly.
¢ If the TIMER and BLOCK are set for overlapping times on the same channel, the
blocked channel will appear on the screen at the time set on the TIMER.
16