Table of Contents
Advertisement
HOW AND WHEN TO USE THE CONTROLS
After loading the laundry,
place the washing powder and
additives into the appropriate
compartments. Before starting
up the machine, check that:
—
the appliance is plugged in
—
the water supply taps are
turned on
—
the drain hose is correctly
and securely positioned
—
the door and the washing
powder dispenser drawer are
closed.
Depress
the
pushbutton(s).
Select
the
required
pro-
gramme
by
turning
the
programme dial clockwise.
At
this
stage,
press
the
«start/stop»
button
to start
the programme up.
The pilot light comes
on
and the programme starts up.
required
When the programme
has
finished, the programme dial
will be in the «ħb position and
the
washing
machine
will
automatically stop.
If you have depressed the
«Rinse Hold» button, the water
remaining in the wash tub must
be drained by pressing again the
same button before opening the
door.
Open the door only at the
end of the programme when
the pilot light beside the door
catch goes out.
If necessary,
stop
the
machine
by
pressing
the
«start/stop» button (|) again.
At
the
end
of
the
programme,
all the
buttons
should be reset to the «rest»
position (not depressed).
THE
WASHING
PROGRAMMES
This
washing
machine
incorporates the «Jet System»
washing
for
a rapid
and
economical wash, since the
machine
uses
only
the
amount of water necessary to
wash each load. This allows
substantial
savings
of
electricity,
detergent
and
time, ensuring at the same
time
optimum
washing
results for all types of fabrics.
The
following
pages
illustrating
all
the
pro-
grammes provide a guide to
the
choice
of the
most
suitable programme for your
laundry.
Advertisement
Table of Contents
