soon as possible and wait until the
message disappears from the
multi-information display.
When the system switches to
■
Normal mode automatically
In the following situations, the sys-
tem switches to Normal mode auto-
matically:
When the driving mode is
●
changed (P.348)
When the engine switch is turned
●
off
Sounds and vibrations when
■
driving in Mud & Sand or Rock
& Dirt mode
Any of the following conditions may
occur when Multi-terrain Select is
operating. None of these indicates
that a malfunction has occurred:
Vibrations may be felt throughout
●
the vehicle or steering wheel
Sounds may be heard from the
●
engine compartment
When the slip indicator illumi-
■
nates
The system may be malfunctioning.
Have the vehicle inspected by your
Toyota dealer immediately.
When the indicator for each
■
mode does not illuminate
The system may be malfunctioning
if the indicator does not illuminate
when selecting the mode other than
Normal mode. Have the vehicle
inspected by your Toyota dealer
immediately.
WARNING
Before using Multi-terrain
■
Select
Make sure to observe the follow-
ing precautions. Failure to
observe these precautions may
result in an unexpected accident.
4-5. Using the driving support systems
Check that the Mud & Sand and
●
Rock & Dirt indicators are illumi-
nated before driving.
Multi-terrain Select is not
●
intended to expand the limit per-
formance of the vehicle. Thor-
oughly check the road
conditions and driving route
before driving, and drive with
caution.
NOTICE
In order to ensure that
■
Multi-terrain Select operates
properly
Do not continuously use Multi-ter-
rain Select for a long period of
time. Depending on the driving
conditions, the load on related
parts increases and the system
may not operate properly.
351
4