Toyota Grand Highlander 2024 Manual page 121

3-2. Opening, closing and locking the doors
WARNING
Do not pull on the back door
●
spindle (P.133) to close the
power back door, and do not
hang on the back door spindle.
Doing so may cause hands to be
caught or the back door spindle to
break, causing an accident.
If a bicycle carrier or similar
●
heavy object is attached to the
power back door, it may sud-
denly shut again after being
opened, causing someone's
hands, arms, head or neck to be
caught and injured. When
installing an accessory part to
the power back door, using a
genuine Toyota part is recom-
mended.
Unlocking and locking the
power back door from the
outside
Smart key system
■
Carry the electronic key to
enable this function.
1
Locks all the doors
Check that the door is securely
locked.
2
Unlocks all the doors
The doors cannot be unlocked for 3
seconds after the doors are locked.
Wireless remote control
■
P.111
Unlocking and locking the
power back door from the
inside
Door lock switch
■
P.118
Opening/closing the
power back door
Opening/closing the power
■
back door using the wire-
less remote control
Press and hold the switch for
approximately 1 second.
The power back door can be oper-
ated whether it is locked
unlocked.
Pressing the switch while the power
back door is opening/closing will
stop the operation.
Pressing and holding the switch
again for approximately 1 second
will operate the power back door in
the opposite direction.
*
: Opening of the power back door
when it is locked can be disabled
by a customized setting.
121
3
*
or