Power Distribution Board And Bracket - Lenovo ThinkStation PX User Manual

Power distribution board and bracket

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the power supply assembly. See "Power supply assembly" on page 36.
2. Remove the left side cover. See "Left side cover" on page 39.
3. Remove the right side cover. See "Right side cover" on page 58.
4. Remove the PSU bay storage enclosure. See "Hard disk drive in the PSU bay storage enclosure" on
page 56.
Removal steps
Loosen the three screws to remove the power distribution board and bracket.
Note: The three screws cannot be removed from the power distribution board bracket.
.
Chapter 5 CRU replacement
61