Table of Contents
Advertisement
3. NAME OF PARTS
CAUTION
For appropriate signal transmission between the remote
controller and the indoor unit, keep the signal receiver
away from the following items:
- Direct sunlight or other strong lights
- Flat-panel television screen
In rooms with instantaneous fluorescent lights, such as
inverter type ones, the signal may not be transmitted
properly. In such a case, consult the store of purchase.
3.1. Indoor unit
: The instruction is relating to the wireless LAN control (optional).
[1]
[2]
[7]
[8]
[1]
Intake grille
Before starting operation, make sure that the intake grille is
closed completely. Incomplete closing may affect the proper
function or performance of the product.
[2]
Air filters
[3]
Front panel
[4]
Rating label
[5]
WLAN adapter slot (Under the wire cover)
[6]
For the Manual Auto operation and Filter indicator reset
(Refer to page 10.)
[7]
Vertical louver
[8]
Indicator lamps
[9]
Remote control signal receiver
[10] Drain hose
Indicator lamps light in the following conditions.
Name
Color
Operation
Green
Timer
Orange
Economy
Green
WLAN
Orange
3.2. Remote controller
• To prevent malfunction or damage of the remote controller:
- Place remote controller at where will not be exposed to direct
sunlight or excessive heat.
- Remove batteries if the product is not going to be used for an
extended period.
• Obstacles such as a curtain or wall between the remote controller
and the indoor unit may affect the appropriate signal transmission.
• Remove the protective film before use.
• Keep the remote control out of reach of infants and young children.
• Keep the batteries out of reach of infants and young children.
[3]
[4]
[5]
[6]
[10]
[9]
Operation or condition
Normal operation
Timer operation
Economy operation
Wireless LAN control is active.
(optional)
CAUTION
• Do not apply strong shocks to the remote controller.
• Do not pour water on the remote controller.
When you use the optional remote controller, the appearance and the
operation procedure may differ.
For details, refer to the operation manual of each remote controller.
: The setting must be done while the setting screen is displayed for each
function.
: The button is controllable only when the air conditioner is operating.
: The instruction is relating to the wireless LAN control (optional).
[2]
[3]
[9]
[1] Signal transmitter
Aim at the signal receiver of the indoor unit properly.
• Operating range is approximately 7 m.
• [
] will appear when the signal is transmitted.
• The indoor unit will emit a beep when it receive the signal properly.
If there is no beep, press the button again.
[2] Remote controller display
In this section, all the possible indicators are displayed for
description. In actual operation, the display is linked with the button
operation, and only shows the necessary indicators for each setting.
[3] For Basic operations ............... Refer to page 4.
Starts or stops the air conditioner operation.
Changes the operation mode.
Adjusts the setting temperature./
Adjusts the value of the timer settings.
En-3
CAUTION
[1]
[4]
[5]
[6]
[7]
[8]
[10]
Advertisement
Table of Contents
