Advertisement
F U N C T I O N
E L E C T R I C P A R K I N G B R A K E
S W I T C H O R H A N D L E *
brake. To manually release the electric parking brake, switch the
ignition on, press the brake pedal and then press the switch or
handle down. The brake system warning lamp turns off. Your
vehicle automatically releases the parking brake when the driver
door is closed, the vehicle is shifted into gear and you press
the accelerator.
Note: The electric parking brake warning tone sounds when the
parking brake is on and your vehicle is moving. If the warning tone
continues after you have released the parking brake, this indicates
a malfunction. Have your vehicle checked as soon as possible.
*if equipped
The electric parking brake
switch or handle replaces the
conventional parking brake.
The switch or handle is on the
center console. To apply the
electric parking brake, pull the
switch or handle up. The brake
system warning lamp flashes,
then illuminates to confirm
that you applied the parking
A U T O H O L D
Auto hold can assist you while stopping at traffic lights or while
in traffic by holding the brakes when you stop the vehicle. You
can switch the system on or off by accessing the menu on
the touchscreen.
1. Press Settings on the touchscreen.
2. Press Driver Assistance.
When the system is on and actively holding the vehicle, the auto
hold icon displays in the instrument cluster. When you press the
accelerator pedal, auto hold automatically releases the brakes. In
certain situations, auto hold may apply the electric parking brake
and illuminate the brake warning lamp in the instrument cluster.
Auto hold can also be programmed to the favorites button. See
Center Display Overview in the Owner's Manual for more details
See the Auto Hold chapter of your Owner's Manual for
more details.
R E M O T E R E V *
Allows you to use the remote control to command the engine to
rev from outside the vehicle.
To enable remote rev, start the engine then press the unlock
button on the remote control followed by the lock button within
three seconds. The engine RPM quickly increases to confirm that
the feature is enabled.
Once remote rev is enabled, press the unlock button on the
remote control followed by the lock button within three seconds.
The engine revs. Remote rev may not be available if the engine is
too cold.
For additional information, see the Keys and Remote Controls
chapter of your Owner's Manual for more details.
5
Advertisement
