Editing On Other Equipment; Dubbing A Tape - Sony Handycam DCR-TRV203 Operating Instructions Manual

-- Editing on Other Equipment m
Dubbing a tape
Using the AN connecting cable or S video connecting cable
(not supplied)
Connect your camcorder to the VCR using the A/V connecting cable supplied with
your camcurder.
Set the input selector on the VCR to LINE, if available.
(1) Insert a blank tape (or a tape you want to _-ord over) into the VCR, and insert
the recorded tape into your camcurder.
(2) Set the_POWER switch to VTR.
(3) Play back the recorded tape on your camcorder.
(4) Start recording on the VCIL
VIDEO
AUDIO
:Signal f low
l
When you have finished dubbing a tape
l_ess • onboth your camcorderandtheVC_
ffyou have displayed the scR,en indicators on the TV
Make the indicato_ppear by pressing SEARCH MODE on the Remote
Commander, DISPLAY or DATA CODE so that they will not be superimposed on the
edited tape.
You can edit on VCRs that support the following systems
I!18 ram, I.Iilti Hi8, _ VHS, _ S-VHS, _ VHSC, _ S-VHSC, l0 Betamax,
ED Betamax, "1_" mini DV, D,v DV or [) Digital8
If your VCR is a monaural type
Connect the yellow plug for video and the white plug for audio on both your
camcorder and the VCR. You do not need to connect the red plug. With this connection,
the sound will be monaural.
Connect.using an S video cable (not supplied) to obtain high-quality pictures
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (not supplied) to the S video jacks of both your camcorder and
the VCR.
To perform a more preciseediting
Connect a LANC cable (not supplied) to your camcorder and other video equipment
having fine s_ilLng function, using ridseameorder as a player.
49