LG ZTNQ32GALH0 Owner's Manual page 7

• Do not install, remove, or re-install the unit by yourself (customer).
Installation or reparis done by unauthorized persons can pose
hazards to you and others.
• For electrical work, contact the dealer, seller, qualified electrician or
authorized service centre.
• Do not attempt to do electrical work or grounding work unless you
are licensed to do so. Consult with the dealer for electrical work and
grounding work.
• Do not install the product on a defective installation stand.
• Be sure the installation area does not deteriorate with age.
• Be sure to only use accessories made by LG which are specifically
designed for use with the equipment and have them installed by a
professional.
• Never install the outdoor unit on a moving base or a place from
where it can fall down.
• Do not install the unit in potentially explosive atmospheres.
• Do not install the air conditioner in a place where flammable liquids
or gases such as gasoline, propane, paint thinner, etc., are stored.
• Install the panel and the cover of the control box safely.
• Install dedicated electric outlet and earth leakage breaker before
using the appliance.
• Use standard circuit breaker and fuse that conform to the rating of
the air conditioner.
• Do not use a multiple socket, extension power cable or adapter with
this appliance.
• The indoor/outdoor wiring connections must be secured tightly, and
the cable should be routed properly so that there is no force pulling
the cable from the connection terminals. Improper or loose
connections can generate heat or cause a fire.
• Do not connect the ground wire to a gas pipe, a lightning rod, or a
telephone ground wire.
• Use non-flammable gas (nitrogen) to check for leaks and to purge air;
using compressed air or flammable gas may cause fire or explosion.
SAFETY INSTRUCTIONS
7