Changing Web-Based Interface Password - D-Link DSL-2640U Quick Installation Manual

DSL-2640U

Changing Web-based Interface Password

On this page you should change the default administrator password. To do this,
enter a new password in the Admin password and Password
confirmation fields. You may set any password except admin. Use digits,
Latin letters (uppercase and/or lowercase), and other characters available in the
US keyboard layout.
Remember or write down the new password for the administrator account.
In case of losing the new password, you can access the settings of the
!
router only after restoring the factory default settings via the hardware
RESET button. This procedure wipes out all settings that you have
configured for your router.
Click the NEXT button.
On the next page, check all the settings you have just specified.
Also you can save a text file with parameters set by the Wizard to your PC. To
do this, click the SAVE CONFIGURATION FILE button and follow the
dialog box appeared.
To finish the Wizard, click the APPLY button. The router will apply settings,
reboot, if needed, and check the Internet connection if the Wizard has
configured a WAN connection.
1 0-9, A-Z, a-z, space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~.
1
Quick Installation Guide
28