Table of Contents
Advertisement
@ Operation
By connecting
this unit to other
KENWOOD
system
components
equipped with SYSTEM
CONTROL
termi-
nals,
such
as a tuner, tape deck, CD player and/or
turntable, the following convenient operations will be
available.
Automatic play operation
When starting play with the turntable, tape deck, or CD player con-
nected to this unit, set the INPUT SELECTOR
knob to PHONO,
TAPE or CD. The turntable, tape deck, or CD player will automatical-
ly enter the play mode.
In the same way, pressing the Play key of the turntable, tape deck,
or CD player will automatically switch the INPUT SELECTOR setting
on this unit to the component on which the play key is pressed.
Synchro recording
To record the sound from the CD player or turntable onto a tape
with the tape deck, set the INPUT SELECTOR
knob to CD or
PHONO and load a CD or record. Set the tape deck to record-pause
mode,
then press
the Play (START)
key of the CD player or
turntable. The deck will start recording automatically, synchronized
with the CD player or turntable starting playing. For more details,
refer to the instruction manual of the tape deck.
Remote control
When the amplifier, tuner, tape deck, CD player, and turntable are
connected via the system control cords, these components can be
controlled from the remote control unit supplied with this unit.
System control connection
Notes:
KC-991 {En}
9
Advertisement
Table of Contents
