Makita RBL500 Instruction Manual page 7

ASSEMBLY INSTRUCTIONS
ASSEMBLY OF BLOWER PIPES
CAUTION: Before performing any work on the blower, always
stop the engine and pull the spark plug connectors off
the spark plug.
Always wear protective gloves!
CAUTION: Start the blower only after having assembled it
completely.
1. Assemble straight pipe with swivel (3) into flexible pipe (1) and
tighten hose band
4
>
78 (2).
2. Install control handle (4) onto straight pipe with swivel and tighten
the clamp screw (5).
3. Assemble flexible pipe to elbow (6) on blower and tighten hose band
0 91 (7).
4. Assemble straight pipe (8) to straight pipe with swivel, turning
straight pipe clockwise to lock it into place. Assemble end pipe (9)
in the same way.
5. Make sure all clamps are tight.