Maintenance And Repairs; How To Make A Claim - Makita RBL500 Instruction Manual

THINGS YOU SHOULD KNOW ABOUT THE EMISSION CONTROLL SYSTEM
WARRANTY
MAINTENANCE AND REPAIRS
You are responsible for the proper use and maintenance of the engine. You should
keep all receipts and maintenance records covering the performance of regular
maintenance in the event questions arise. These receipts and maintenance records
should be transferred to each subsequent owner of the engine. MAKITA U.S.A., INC.
reserves the rights to deny warranty coverage if the engine has not been properly
maintained. Warranty claims will not be denied, however, solely because of the lack
of required maintenance or failure to keep maintenance records.
MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL
DEVICES AND SYSTEMS MAY BE PERFORMED BY ANY REPAIR
ESTABLISHMENT OR INDIVIDUAL; HOWEVER, WARRANTY REPAIRS
MUST BE PERFORMED BY A DEALER OR SERVICE CENTER
AUTHORIZED BY MAKITA U.S.A., INC.. THE USE OF PARTS THAT ARE
NOT EQUIVALENT IN PERFORMANCE AND DURABILITY TO
AUTHORIZED PARTS MAY IMPAIR THE EFFECTIVENESS OF THE
EMISSION CONTROL SYSTEM AND MAY HAVE A BEARING ON THE
OUTCOME OF WARRANTY CLAIM.
If other than the parts authorized by MAKITA U.S.A., INC. are used for maintenance
replacements or for the repair of components affecting emission control, you should
assure yourself that such parts are warranted by their manufacturer to be equivalent to
the parts authorized by MAKITA U.S.A., INC. in their performance and durability.
HOW TO MAKE A CLAIM
All repairs qualifying under this limited warranty must be performed by a dealer or
service center authorized by MAKITA U.S.A., INC.. In the event that any emission-
related part is found to be defective during the warranty period, you shall notify MAKITA
U S A., INC. at 714-522-8088 and you will be given the appropriate warranty service
facilities where the warranty repair can be performed.
18