Safety Precautions; Antenna Installation Instructions - JVC GR-DVL100U Manual

Dear Customer,
Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions
contained in the following pages to ensure safe use of this product.
Using This Instruction Manual
Itis recommended that you...
information regarding the safe use ofthis product.
INSTRUCTIONS
All major sections and subsections are listed in the Table Of Contents on the cover page.
'Notes appear after most subsections. Be sure to read these as well.
* Basic and advanced features/operation are separated for easier reference.
refer to the Index (C3" pgs. 59 - 63) and familiarize yourself with button locations, etc. before use.
read thoroughly the Safety Precautions and Safety instructions that follow. They contain extremely important
You are recommended to carefully read the cautions on pages 64 through 66 before use,
SAFETY PRECAUTIONS
FISK OF€.EOTRIG SHOCK)
'BONOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE,
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
'The lightning fash with arrowhead symbol, thin an
equlatral tangle, i intended to alr the user to the
presence of uninsulated "dangerous voltage" win the
[roduets enclosure that may Be of sutcient mageituse
{constitute a risk of acre shock to persons.
'The exclamation poit within an equilateral tangle fs
Intended to alan he user to the presence of important
'operating and maintenance (servicing) instuctons in
NOTES:
© The rating plate (serial number plate) and safety
caution are on the bottom and/or the back of the
main unit
© The rating plate (serial number plate) of the AC
Power Adapter/Charger is on its bottom.
|
|
This camcorder is designed to be used with NTSC-
type color television signals. it cannot be used for
playback with a television of a different standard.
However, live recording and LCD monitor!
viewfinder playback are possible anywhere. Use the
BN-V40BU/V416U/V428U battery packs and, to
recharge them, the provided mult-voltage AC
Power Adapter/Charger. (An appropriate conversion
adapter may be necessary to accommodate different
'designs of AC outlets in different countries.)
The AA-V40U AC Power Adapter/Charger should be
used with:
AC 120 Vr, 60 Hz in the USA and Canada,
AC 110V- 240 Vv, 50 H2/60 Hz in other countries.
CAUTION (applies to the AA-V40U)
TO PREVENT ELECTRIC SHOCK MATCH WIDE
| BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION (s'applique a 'AA-V40U)
POUR EVITER LES CHOCS ELECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE
LA PRISE ET POUSSER JUSQU'AU FOND.
L
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR
MOISTURE.
When the equipment is installed in a cabinet or on
a shelf, make sure that is has sufficient space on all
sides to allow for ventilation (10 cm (3-15/16") or
more on both sides, on top and at the rear).
Do not block the ventilation holes.
(if the ventilation holes are blocked by a newspaper,
or cloth etc. the heat may not be able to get out.)
No naked flame sources, such as lighted candies,
should be placed on the apparatus.
When discarding batteries, environmental problems
must be considered and the local rules or laws
governing the disposal of these batteries must be
followed strictly.
The apparatus shall not be exposed to dripping or
splashing,
Do not use this equipment in a bathroom or places
with water.
Also do not place any containers filled with water or
liquids tsuch as cosmetics or medicines, lower
vases, potted plants, cups etc.) on top of this unit,
(if water or liquid is allowed to enter this equip-
'ment, fire of electric shock may be caused.)
(Thi
IMPORTANT PRODUCT
SAFETY INSTRUCTIONS
Electrical energy can perform many useful functions.
But improper use can result in potential electrical
shock or fire hazards. This product has been F
engineered and manufactured to assure your
personal safety. In order not to defeat the built-in
safeguards, observe the following b a s i c rules for its
installation, use and servicing.
ATTENTION:
Follow and obey all warnings and instructions
marked on your product and its operating instruc-
tions. For your safety, please read all the safety and
operating instructions before you operate this
product and keep this manual for future reference.
INSTALLATION
1. Grounding or Polarization
(A) Your product may be equipped with a polarized
alternating-current line plug (a plug having one blade
wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature.
If you are unable to insert the plug fully into the
'outlet, try reversing the plug. if the plug should stil
fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of
the polarized plug
(B) Your product may be equipped with a 3-wire
grounding-type plug, a plug having a third (ground-
ing) pin. This plug will only fit into a grounding-type
power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet,
coniact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
'grounding-type plug.
2. Power Sources
'Operate your product only from the type of power
source indicated on the marking label. if you are not
sure of the type of power supply to your home, consult
'your product dealer or local power company. if your
product is intended to operate from battery power, or
other sources, refer to the operating instructions.
3. Overloading
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire
or electric shock.
4. Power Cord Protection
Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
'upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point
Where they exit from the product.
instraction manual is for the GR-DVL500U/DVL300U)
end
5. Ventilation
Slots and openings in the cabinet are provided for
ventilation. To ensure reliable operation of the product,
and to protect it from overheating, these openings must
not be blocked or covered.
* Do not block the openings by placing the product on a
bed, sofa, rug or other similar surface.
* Do not place the product in a built-in installation such
as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have been
adhered to.
6. Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling only,
as recommended by the manufacturer.
ANTENNA INSTALLATION
INSTRUCTIONS
1. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the
product, be sure the antenna or cable system is
grounded so as to provide some protection against
Voltage surges and built-up static charges. Article 810 of
the National Electrical Code, ANSVNFPA 70, provides
information with regard to proper grounding of the mast
and supporting structure, grounding ofthe lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
Connection to grounding electrodes, and requirements
for the grounding electrode.
2. Lightning
For added protection for this product during a lightning
storm, or when it is left unattended and unused for long.
periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and
powerline surges.
3. Power Lines
'An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines
'or circuits. When installing an outside antenna system,
'extreme care should be taken to keep from touching,
such power ines or circuits ag comact wih them might
fatal.
EXAMPLE OF ANTENNA GROUNDING AS PER.
NATIONAL ELECTRICAL CODE, ANSUNFPA 70
ANTENNA
EAD IWR
DISCHARGE UNTT
(Wes SECTION
81020)
"GROUNDING CONDUCTORS
(WEC SECTION 810-21)
'GROUND CLAMPS
POWER SEAVICE GROUNDING ELECTRODE SYSTEM
(WEC ART 250. PART)
NEC NATIONAL ELECTRICAL CODE.