Table of Contents
Advertisement
78
9 Tint (Command: k j)
► To adjust the screen tint.
You can also adjust tint in the picture settings.
Transmission
(k)(j)( )(Set ID)( )(Data)(Cr)
Data Red : 00 to Green : 64
* Refer to "Real data mapping".
Ack
(j)( )(Set ID)( )(OK/NG)(Data)(x)
10 Sharpness (Command: k k)
► To adjust the screen sharpness.
You can also adjust sharpness in the picture settings.
Transmission
(k)(k)( )(Set ID)( )(Data)(Cr)
Data Min : 00 to Max : 32
* Refer to "Real data mapping".
Ack
(k)( )(Set ID)( )(OK/NG)(Data)(x)
11 OSD Select (Command: k l)
► To select OSD (On Screen Display) on/off when controlling remotely.
Transmission
(k)(l)( )(Set ID)( )(Data)(Cr)
Data 00 : Off
Data 01 : On
Ack
(l)( )(Set ID)( )(OK/NG)(Data)(x)
12 Remote Control Lock Mode (Command: k m)
► To lock the front panel controls on the monitor and remote control.
Transmission
(k)(m)( )(Set ID)( )(Data)(Cr)
Data 00 : Off
Data 01 : On
Ack
(m)( )(Set ID)( )(OK/NG)(Data)(x)
* If you are not using the remote control, use this mode. When main
power is on/off, external control lock is released.
* In the standby mode, if key lock is on, TV will not turn on by power
on key of IR & Local Key.
13 Balance (Command: k t)
► To adjust balance.
You can also adjust balance in the audio settings.
Transmission
(k)(t)( )(Set ID)( )(Data)(Cr)
Data L : 00 to R : 64
* Refer to "Real data mapping".
Ack
(t)( )(Set ID)( )(OK/NG)(Data)(x)
14 Colour Temperature (Command: x u)
► To adjust Colour Temperature. You can also adjust Colour Temperature in
the picture settings.
Transmission
(x)(u)( )(Set ID)( )(Data)(Cr)
Data Warm: 00 to Cool:64
* Refer to "Real data mapping".
Ack
(u)( )(Set ID)( )(OK/NG)(Data)(x)
Advertisement
Table of Contents
