Draytek Vigor2866 Series Quick Start Manual page 16

Off
Blinking
On
Right LED
Off
Interface Description
Wireless band will be switched /changed according to the
button pressed and released. For example,
 2.4G (On) and 5G (On) – in default.
 2.4G (Off) and 5G (On) – pressed and released the button
Wireless LAN
 2.4G (On) and 5G (Off) – pressed and released the button
ON/OFF/WPS
 2.4G (Off) and 5G (Off) – pressed and released the button
When WPS function is enabled by web user interface, press
this button for more than 2 seconds to wait for client's device
making network connection through WPS.
Restore the default settings. Usage: Turn on the router (ACT
LED is blinking). Press the hole and keep for more than 5
Factory Reset
seconds. When you see the ACT LED begins to blink rapidly
than usual, release the button. Then the router will restart
with the factory default configuration.
Connecter for a USB device (for 3G/4G USB Modem or printer
USB
or thermometer).
Connecter for local network devices or modem for accessing
Internet.
WAN2 / P6
It is a switchable port. It can be used for LAN connection or
WAN connection according to the settings configured in WUI.
Connecters for local network devices.
LAN P1-P5
Phone 1/2 Connecter for analog phone(s).
DSL Connecter for accessing the Internet.
Connecter for installing WLAN antennas.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
once.
twice.
three times.
9