Draytek Vigor2866 Series Quick Start Manual page 10

On
Right LED
Off
LAN P1-P5
On
Left LED Off
Blinking
On
Right LED
Off
Interface Description
Restore the default settings. Usage: Turn on the router (ACT
LED is blinking). Press the hole and keep for more than 5
Factory Reset seconds. When you see the ACT LED begins to blink rapidly
than usual, release the button. Then the router will restart
with the factory default configuration.
Connecter for a USB device (for 3G/4G USB Modem or printer
USB
or thermometer).
Connecter for local network devices or modem for accessing
Internet.
WAN2 / P6
It is a switchable port. It can be used for LAN connection or
WAN connection according to the settings configured in WUI.
Connecters for local network devices.
LAN P1-P5
DSL Connecter for accessing the Internet.
PWR Connecter for a power adapter.
ON/OFF Power Switch.
Connecter for installing LTE antennas.
SIM Card Slots for installing SIM card(s).
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
3