Table of Contents
Advertisement
Note:
These instructions apply to multiple display setups only. These instructions are
recommended for advanced Wacom device users.
1.
Open Wacom
Center.
2. Select your device in the
Mapping
3. Select
and then click
Show advanced options
4. Turn the
5. Close the
Advanced
6. In Mapping settings, choose "Select portion..." under
Map a portion of your screen setup
7. In the
a portion of your screen displays:
Use the drag handles to drag the corners of the blue border to define the screen area that you want to
map to.
Click to define
Select
Enter the
Top, Bottom, Left,
The above screenshot is for descriptive purposes; it may not match your screen.
Map your device to one of multiple displays
If you have multiple displays, your Wacom device will be mapped to all of the displays by default. If you wish to map
your device to a single one of the displays, follow the instructions below.
Note:
These instructions apply to multiple display setups only.
1.
Open Wacom
Center.
2. Select your device from the
Mapping
3. Select
.
4. Under
Display mapping
5. On the
Select a display
Tip:
You can use
working on all of your displays at once.
Devices
sidebar.
Advanced
.
toggle "On" and make sure
settings.
window, use any of the following methods to map your device to
and use your cursor to select the screen area that you want to map to.
and
Right
coordinates in pixels.
Devices
sidebar.
, choose "Select one display".
screen, select the display screen you wish to map to and click
Display toggle
to toggle between working on an individual display to
Pen mode
is selected.
Display mapping
.
User's Manual
Apply
.
71
71
Advertisement
Table of Contents
