Table of Contents
Advertisement
REAR PANEL FACILITIES
FRONT SPEAKERS terminals
A: Connect to the first set of speakers.
B: Connect to a second set of speakers.
Speaker impedance:
Refer to @ SPEAKER
IMPEDANCE SELECTOR switch.
NOTE:
Do notallow
any of the cora's conductors to protrude from the terminals
or touch any other conductors. Maifunctioning or breakdowns may
occur when conductors come into contact with each other.
@) SPEAKER IMPEDANCE SELECTOR switch
Set this switch to match the impedance of your front speakers.
im When using one pair of speakers:
Impedance of a speaker
8 @ to less than 16 2
HIGH
42 to less than 8 Q
Low
Selector position
Ls
fii] When using two pairs of speakers:
x
Select LOW as the selector switch position and use speakers with a
nominal impedance of between 8 Q and 16 Q.
NOTE:
Turn off the receiver's power before changing the impedance selector
switch setting.
@ AC OUTLETS
[U.S. and Canadian models]
SWITCHED
TOTAL 200 W (1.6 A) MAX
Power supplied through these outlets is turned on and off by the
receiver's
POWER
switch,
Total electrical power
consumption
of
connected equipment should not exceed 200 W (1.6 A).
UNSWITCHED 200 W (1.6 A) MAX
Power flows continually to this outlet, regardless of whether the receiver
is switched ON or OFF. Electrical power consumption of the connected
equipment should not exceed 200 W (1.6 A).
{Multivoltage model]
SWITCHED TOTAL 100 W MAX
Power supplied through these outlets is turned on and off by the
teceiver's
POWER
switch.
Total electrical power
consumption
of
connected equipment should not exceed 7100 W.
UNSWITCHED
100 W MAX
Power flows continually to this outlet, regardless of whether the receiver
is switched ON or OFF. Electrical power consumption of the connected
equipment should not exceed 100 W.
NOTE:
Do not connect appliances with high power consumption such as
heaters, irons, or television sets to these AC OUTLETS in order to avoid
overheating and fire risk.
This can cause the receiver to maifunction.
CAUTION:
DO NOT CONNECT MONITOR OR TV SET.
@ AC Power cord
Connect to AC wail socket.
NOTE:
This unit should be disconnected by removing the power plug from the
wail socket when not in regular use, e.g. when on vacation.
25
<ARB1420>
Advertisement
Table of Contents
