Kenwood DP-492 Instruction Manual page 9

@ Listening from the desired track
Select a track No. of the desired tune.
OC,
®@ The selected track No. and play indicator are displayed and
the play starts,
@ When the [Hee] key is pressed once during olay, the track |
starts again from the beginning.
When this unit is connected to a KENWOOD amplifier or
receiver with a system control cord, and when numeric keys
are provided in the remote control unit supplied to the ampli-
fier or receiver, the track No. can Girectly be selected.
Far details, refer to the Instructions supplied with the amplifi-
er or receiver.
TIME DISPLAY key _
TIME DISPLAY key
P-MODE key
CHECK key
Search keys
Skip keys
To fast forward or backward
oo
® The fast forward or reverse speed increases as the key is
held depressed. :
@ The track will start to play from where you release the key.
Notes:
1. Ifa track No. which is not present on the CD is selected while the
tray is open, the fast track on the CD will be played.
2. Such a selection is not accepted after the tray has been closed
or playback has started.
Press the | TIME DISPLAY| key when you want to check the elapsed time and remaining time of the track being played. Every time the
TIME DISPLAY | key is pressed, the displayed time is switched as shown below.
The time information display may not appear when playing a CD containing 44 or more tracks or if the total playing time of tracks programmed
im the PGM mode is 100 minutes or more. In such a case, the display will show ""— — : — —"'. Only the ''SINGLE TIME""' is displayed during
random play.
TIME DISPLAY SINGLE/TOTAL TIME display
The remaining time ts displayed
with the ''—*" (negative) sign.
SINGLE TIME
Eiapsed time
of the track of the track of the whcle of the whole
i being played | being played ie CD i CD i
TOTAL TIME
Remaining time
SINGLE TIME
Remaining time
TOTAL TIME
Elapsed time
DP-492 (En) 9