Kenwood DP-492 Instruction Manual page 10

Programmed play (PGM mode)
Up to 20 tunes can be programmed in the desired order and can be played.
M@ Playing desired tracks in desired order
1 Enter the PGM mode.
Press the key.
lights up.
2 Program desired tracks in desired order.
1) Select a tune to be programmed.
SES.
@) Press the key.
P-MODE
The number of the
selected track in the pro-
gram (P-No.) is dis-
played for a few
seconds.
The total time of the
= selected track will be
8 displayed.
® Repeat steps (@ and @). Up to 20 tunes can be programmed.
® When selecting a tune with the numeric key in the remote
control unit, it is not necessary to press the key
after selecting a tune.
@ {f you made a mistake, press the key and select
the correct track.
3 Start playback.
PLAY/PAUSE
nw ee /i
®@ Tracks are played in the order they are programmed (P-No.).
® |i one of the skip keys ( [bet] or [Hed ]} is pressed during
programmed playback, the track being played is skipped in
the forward or reverse direction.
10 op-492 (En)
To check the programmed order
CHECK
lights up.
Track No.
@ Every time the kay is pressed, the track No. and
the order it was programmed (P-No.} are displayed in the
order of programming.
® The orevious display will resume in a few seconds.
To resume normal playback
P-MODE
@ The playback in the order of the track Nos. on CD will start
after the track being played.
To stop programmed playback
PLAY/PAUSE
TAL
Auto-Space function
During playback in the program mode, 2 space of about 4 seconds
is reserved automatically between the programmed tracks. This func-
tion is provided to facilitate the DPSS function of the cassette deck.
However, such a space could also be reserved in case the sound
of two tracks are continued, for example with some classic music
and live recordings.