Installation Drawings (Lse Series Only) - LG LSE3392S Installation Manual

INSTALLATION DRAWINGS (LSE Series only)

NOTE
SAVE FOR THE USE OF THE LOCAL ELECTRICAL INSPECTOR
CLEARANCES AND DIMENSIONS (Figure 1)
To install range refer to the following Figure 1.
For installation in CANADA, a Free-standing range is not to be installed closer than
adjacent surface.
CAUTION
• Make sure that the wall covering, countertop
and cabinets around the range can withstand
the heat (up to 194°F) generated by the range.
- Discoloration, delamination or melting may
occur.
- This range has been designed to comply
with the maximum allowable wood cabinet
temperatures of 194°F.
24"
(60.9cm)
A = 30"(76.2 cm) For U.S.A
= 30"(76.2 cm) ~ 31"(78.7 cm) For CANADA
FIGURE 1
MINIMUM DIMENSIONS (Figure 2)
* 30"(76.2 cm) minimum clearance between the top of the cooking surface and the bottom of an unprotected wood
or metal cabinet; or 24"(60.9 cm) minimum when bottom of wood or metal cabinet is protected by not less than
/ "(6.4 cm) flame retardant millboard covered with not less than no. 28 MSG sheet steel, 0.015"(0.381 mm) stainless
1
4
steel, 0.024"(0.610 mm) aluminum or 0.020"(0.508 mm) copper.
** 15"(38.1 cm) minimum between countertop and adjacent cabinet bottom.
PREPARE TO INSTALL THE RANGE
CAUTION
• Cabinet storage space located above the
surface units should be avoided.
• Install a range hood that projects horizontally
a minimum of 5 inches beyond the bottom
of the cabinets. If cabinet storage is to be
provided.
- The risk of burns or fire by reaching over the
heated surface elements can be reduced.
FIGURE 2
7
/ (12mm) from any
15
32