Toshiba Qosmio G20-102 User Manual page 72

Getting Started
Restoring QosmioPlayer
To restore QosmioPlayer, follow the steps below.
1. Load the QosmioPlayer Recovery CD in the optical media drive and
turn off the computer's power.
2. Hold down the F12 key and turn on the power. When Qosmio appears,
release the F12 key.
3. Use the left or right cursor key to select the optical media drive in the
Boot Devices menu. For details, refer to the
Chapter 7, HW Setup.
4. Follow the on-screen instructions.
Your computer may be configured with either one or two hard disk drives.
When you have two hard disks installed, data will be recovered onto
built-in HDD1 regardless of the HDD Priority settting.
3-12
Boot Priority section in
User's Manual