Writing Cds On Dvd-Rom&Cd-R/Rw Drive - Toshiba Qosmio F20-110 User Manual

How to remove CD/DVD when the disk tray will not open
Pressing the eject button will not open the disc tray when the computer
power is off. If the power is off, you can open the disc tray by inserting a
slender object (about 15 mm) such as a straightened paper clip into the
eject hole just to the right of the eject button.
Turn off the power before you use the eject hole. If the CD/DVD is spinning
when you open the disc tray, the CD/DVD could fly off the spindle and
cause injury.
Writing CDs on DVD-ROM&CD-R/RW drive
Depending on the type of drive installed, you may be able to write CDs.
The DVD-ROM&CD-R/RW drive lets you write as well as read CD-ROMs.
Observe the precautions in this section to ensure the best performance for
writing CDs. For information on loading and unloading CDs refer to the
Using optical media drives
Refer to the
writable CD/DVD discs.
Do not turn off the power of the optical media drive while the computer
is accessing the drive. If you turn off the power, you may lose data.
User's Manual
Manual release with the eject hole
section.
Writable discs, Chapter 2 for the details about the types of
Operating Basics
Eject hole
4-5