Information Display - Sony CDP-C425 Operating Instructions Manual

Shows that disc is selected to play.
When either all the selections on a
disc have been played, or the disc
is not selected to play, the semi
Appears under the
tray number where
the disc currently otal number of selections
pam
<
Information Display
if you press & or the compartment itself to close the
compartment, the total number of selections and the total
playing time of the disc to be played are displayed for a
few seconds.
If you press TIME during stop, you can choose either
combination for the display data.
Each time you press TIME during play, the display
changes to give you the following information.
Elapsed time in a selection (automatically displayed
when play begins)
Remaining time in the selection
". --" indication will appear in the display window
instead of the actual time, if a selection numbered 21
or higher is selected.
Remaining time of the disc
Notes
e Tota! remaining time is only available during continuous mode. It
will not be displayed by pressing the TIME button during
program or shuffle mode.
e Total remaining time will be displayed, if time fade is set during
program or shuffle mode.
What is this indication?
-, =, J §' evr
tlt mt ae
This indication appears when there is no disc at all in the tray.