Designating The Playing Time - Program Edit - Sony CDP-C425 Operating Instructions Manual

.
=e a
desired order according to t
your tape. You can also make a program for
both side A and B of the tape at one time.
Press selection number in the desired order."
e For the CDP-C325, this step can be operated
with the remote commander only.
e For the CDP-C225, go on to "Designating the
Playing Time - Program Edit".
3 © >
Chosen selections
CDP-C325/C225
2,4,5,7 8 4,5,76 osc sxe
* To choose a selection number over 10, see page
10.
Designating the Playing Time
- Program Edit
ES Choose selection and check the time.
ae |
b
Press I/II repeatedly to choose an appropriate
"PROGRAM" is displayed.
The selection is stored, and the flashing numbers in
the window light up.
To program additional selections from the same
If you program a whole disc, see "To program disc, repeat step 4.
a whole disc". To program additional selections from another disc,
repeat steps 3 and 4.