Kenwood KC-207 Instruction Manual page 7

System control connections operation
Connection 2.
Using the system control cord provided witht the KENWOOD
system component models make connection as below.
Operation
1. Automatic play operation
When starting play with the CD player, turntable or tape
Synchro recording
To record the sound from the CD player or turntable onto
the tape with the cassette deck, press the PLAY (START)
key of the CD player. The cassette deck will start recording
automatically, synchronized with the CD player starting
play. For more details, refer to the instruction manual of
the cassette deck.
e:
In the same way, pressing the Play key of the CD player,
turntable or tape deck etc. will automatically switch the IN-
PUT SELECTOR on the amplifier or receiver to the equip- 2
ment on which the Play key is pressed.
1.
[U.S.A., military and other models] Turntable
System control operation of the unit connected to the TAPE 2
jacks can not be carried out.
For connections of the audio cords, refer to the ''System connec-
tions' diagram.
* Connect to green terminal.
Turntable
a ol
Power amplifier
Control amplifier
"enn wat A 2
\e eeceec|oed oe
® eecececiee po
Tapedeck
CD player
== To a wall AC outlet
KC-207 (kK) 7